SA-E06-H EDGE™ Heavy Ops Stock HAL2™ Carbine Replica Black

€305,71

SA-E06-H EDGE™ Heavy Ops Stock HAL2™ airsoft rifle

EDGE™ is a line of Specna Arms replicas that combines a range of solutions and technologies that are difficult to find in other replicas on the market. It's a line that focuses on both very good external workmanship, solutions that increase the versatility of the replica, prolong its life, make it easier to diagnose malfunctions, as well as susceptibility to power tuning. Straight out of the box you get a replica in which you don't have to make any modifications, but if you want to - they will be fabulously easy.

The barrel is an original Specna Arms design, combining aesthetic values and high ergonomics. Each element was made and fitted with attention to detail. The replica is equipped with a double-sided selector, magazine release and steel sling eyelet. In addition, a Nano Coating was used to finish the body to prevent scratches.

The replica has been equipped with the advanced Specna Arms HAL2 ™ electronic control system. This is a Polish system in which the magnetic Hall effect based trigger provides unprecedented sensitivity (up to 500 points), responsive operation, while being insensitive to dirt and external light. The HAL2 ™Widget works with all standard triggers, so you can choose from the numerous models available on the market and personalise your replica even further. The built-in Bluetooth® Low Energy enables an easy and stable connection to your phone, and at the same time ensures a long battery life for the replica. Simply switch it on and it is immediately possible to configure the settings. On the other hand, a number of sensors watch over the replica's trouble-free operation and will prevent damage to the replica - should a problem be detected.

With the free Speca Link™ Google Playapp or Specna Link™ App Store, you will discover all the possibilities of the HAL2 ™ chip. This intuitive and glove-friendly tool will allow you to quickly adapt the parameters of your replica to the requirements of a given shooter. You can create several profiles for one replica - with different settings or create accounts for several different replicas. Then all you have to do is select the option in the app and you're ready to play!

All the capabilities of HAL^2 and the Specna Link ™ app:

- trigger sensitivity adjustment,

- precocking for faster trigger press response,

- selectable shooting modes: SINGLE, BINARY, SERIAL or AUTO and assign it to the selected selector position,

- adjustment of batch length,

- rate of fire setting,

- liPo/LiIon battery over-discharge protection,

- magazine mode,

- continuously displayed battery charge level,

- saving of settings for different game modes,

- advanced telemetry data, which can be collected in one place and performance monitored with it,

- the ability to track the status of the replica in real time.

The model is equipped with an adjustable Heavy Ops stock. The Heavy Ops stock has been fitted with an enlarged stock foot and rubber panels with a non-slip texture. The stock design itself has been enlarged so that it seamlessly accommodates high-capacity batteries while maintaining an ergonomic shape.

The SA-E06-H airsoft rifle is equipped with a front free-float rail in the 22mm RIS mounting system. In addition to the long, dorsal RIS rail on which folding sights are placed, the replica has a short rail under the barrel and on the sides of the rail.

The carbine is fitted with a factory-installed MOSFET X-ASR system by the Polish brand GATE, an unprecedented collaboration between a Polish manufacturer and a well-known airsoft gun factory. The highest quality MOSFET X-ASR will take care of the safety of the replica's components, improve the response to the trigger and the life of the electronics and battery, as well as allow you to diagnose basic failures inside the replica thanks to the built-in indication LEDs.

The replica has a stock-mounted 6.03mm precision internal barrel, which will ensure high accuracy and repeatability of shots fired. A rotating Hop-Up chamber of a new type cooperates with the barrel, which allows for a very precise and stable adjustment of the ball cocking system.

The replica uses a quick spring exchange system, ESA™. It allows quick and efficient adjustment of the replica's power to the conditions expected on the battlefield without the need to have access to a workshop or a number of specialised tools - simply unscrew the butt guide to reveal access to exchange the spring without having to pull out or disassemble the gearbox.

The advantages of the ESA™ system are difficult to overstate. In view of the arrangements within the environments themselves, this system guarantees the user considerable possibilities and a great deal of freedom. The ESA™ system makes it possible, with a minimum of time, to change the mainspring and thus adjust the replica's discharge velocity to the area of play so as to guarantee an ideal compromise between the effectiveness of firearms and the safety of oneself and other players. Also included in the box with the replica is a second M90 mainspring, which is perfect for indoor gameplay.

At the heart of the replica is an ORION Gearbox based on a reinforced frame and equipped with a mainspring release function. Straight out of the box, the replica has a number of high-quality parts, so it has a high operating culture and is ready for further tuning. The ORION Gearbox is ready for use with M140 springs, with components such as:

- reinforced polymer piston with full steel jaw
- aluminium, sealed nozzle
- aluminium double-sealed cylinder head
- polymer piston head with bearing
- bearing spring guide
- set of steel gears
- 8mm ball bearings

Included in the box with the replica are two S-MAG mid-cap magazines with a capacity of 125 BBs each. The S-MAG is an exclusive polymer magazine designed by Specna Arms. What draws attention is the distinctive texture composed of Specna Arms logos. The S-mag ensures trouble-free ball feeding, even at high ROF.

Package include: