{"product_id":"gunfire-1152225943-titan-v2-basic-controller-set-front-wired","title":"TITAN™ V2 BASIC controller set [front wired]","description":"\u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eTITAN™ V2 BASIC controller set [front wired]\u003c\/strong\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003eThe \u003cspan\u003eTITAN™ V2 Drop-In mosfet controller set transforms your AEG into an advanced training replica. It gives you a tactical edge with lightning-fast trigger response, with the ability to modify the replica and adapt it to any mission with 20 available features. This is GATE's most advanced and top-of-the-line model. \u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003eThe TITAN™ V2 controller breathes a whole new life into the ASG electric replica.\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eThe BASIC version of the controller includes the following features:\u003c\/strong\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e- AUG mode\u003cbr\u003e- Diagnostic function\u003cbr\u003e- Software update capability\u003cbr\u003e- Cycle detection\u003cbr\u003e- Adjustable trigger sensitivity\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan style=\"colour: #ff0000;\"\u003e\u003cstrong\u003eCaution!\u003c\/strong\u003e \u003c\/span\u003eTo unlock all the features of the \u003cstrong\u003eADVANCED\u003c\/strong\u003e version you must purchase the \u003cstrong\u003eFIRMWARE UPGRADE\u003c\/strong\u003e to the \u003cstrong\u003eADVANCED\u003c\/strong\u003e version at www.gatee.eu\/editions\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003ePossibilities of the TITAN™ system:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e - Trigger sensitivity adjustment\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e - Pre-cocking boost, which is an adjustment for keeping the spring taut (shortens the time from pressing the trigger to firing)\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- Adjusts the fire selector modes\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- Series firing mode\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- Adjusts the rate of fire\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- Adjusts the rate of fire\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- Warns of low battery\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e-. Protects battery from damage\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- \"Sniper delay\"\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e- Full cycle detection\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e- AUG mode - two trigger sensitivities can be set (single and continuous fire)\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eDetailed description of TITAN™ controller features:\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eREGULATION\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eTrigger sensitivity\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eFive sensors allow you to control the trigger sensitivity. There is no need to take the replica apart, just use the Tactical Programmer Card, or the GATE™ Control Station app to do so. It will allow you to tailor the replica to your skills and individual preferences.\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eCONFIGURABLE FIRE SELECTOR (gen. 2)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe two sensors can be programmed in three ways, with up to 6 functions to choose from:\u003cbr\u003e- SAFE-SEMI-AUTO\u003cbr\u003e- SAFE-SEMI-SEMI\u003cbr\u003e- SAFE-SEMI-BURST*\u003cbr\u003e- SAFE-BURST*-AUTO\u003cbr\u003e- SAFE-SEMI-BURST*\/AUTO (short hold - BURST, long hold trigger AUTO)\u003cbr\u003e- SAFE-BURST*-AUTO (SAFE by quickly switching modes, then: SAFE-SEMI-SAFE)\u003cbr\u003e*BURST stands for series shooting mode.\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eCYCLE DETECTION\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe TITAN™ control system can detect exactly the position in which it should end the cycle. This ensures that even the shortest squeeze of the trigger will result in a full firing cycle (replicas without the TITAN™ system often jam when the trigger is held too briefly if it does not finish firing. TITAN™ eliminates this defect).\u003cbr\u003e\u003c\/span\u003eThis gives you:\u003cbr\u003e- Automatic BURST (batch) mode, there is no need to set the batch cycle time, just set how many rounds are to be fired\u003cbr\u003e- Automatic Pre-Cocking, which is available in every fire selector setting mode: SEMI BURST and AUTO. So unlike normal MOSFETs, you do not have to configure this function manually. Simply set the pre-cocking power of the spring\u003cbr\u003e- ALWAYS FULL CYCLE - when pre-cocking is disabled \u003cspan\u003eTITAN™ will make sure that the gearbox performs a full cycle and the spring is sure to be released after firing. This results in greater gear reliability.\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003ePRE-COCKING (gen.2*)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eBecause victory in a duel often depends on a fraction of a second, pre-cocking the spring results in a trigger response comparable to a real firearm. The spring is pre-tensioned, so at the same time we warn that using this mode on strong springs leads to faster wear of the replica's internal parts.\u003cbr\u003eThere are two modes of using the PRE-COCKING function:\u003cbr\u003e1. AUTO (-matic) mode - the spring is tensioned after each shot\u003cbr\u003e2. SMART mode - the spring is tensioned by slowly depressing the trigger, and the shot is fired by quickly depressing it.\u003cbr\u003eThree PRE-COCKING mode options can be programmed: HIGH \/ MID \/ LOW - each will adjust the spring tension to a different degree\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e*The PRE-COCKING mode now works in all selector modes: SEMI, BURST, AUTO and does not require manual calibration\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cstrong\u003eBURST (gen.2)\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eThe BURST mode, or programmable batch shooting, now only requires the selection of the number of balls to be fired (up to 10 balls \/ trigger pull). This is very useful on any MILSIM or when using real\/low -cap magazines.\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eROF CONTROL\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eAllows you to reduce the firing rate of the replica. This allows you to use more powerful Li-Po batteries and still have a rate of fire consistent with the actual weapon.\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eROF STAB\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eAllows you to change the way ROF CONTROL works:\u003cbr\u003e- ON - ROF Control adjusts the speed of the cycle, making the Gearbox run smoothly and reducing wear and tear on the replica's internal parts\u003cbr\u003e- OFF - RIF Control adds a pause between each shot to reduce the rate of fire. This gives a very realistic feel\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eSNIPER DELAY\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003eAllows you to set the delay between each shot in SEMI mode to simulate delay by reloading or recoil compensation. Can be set to: 0.5s, 1.0s, 2.0s, 3.0s\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003eFor a comprehensive description of all features, please visit the manufacturer's website: \u003ca href=\"http:\/\/www.gatee.eu\/\"\u003ehttp:\/\/www.gatee.eu\/\u003c\/a\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003eFull\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003einstructions\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan be found at the following address:\u003c\/span\u003e\u003c\/p\u003e \u003cdiv style=\"text-align: justify;\"\u003e\u003ca href=\"http:\/\/gatee.eu\/images\/gate\/instrukcje\/titan-pl.pdf\"\u003ehttp:\/\/gatee.eu\/images\/gate\/instrukcje\/titan-pl.pdf\u003c\/a\u003e\u003c\/div\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cstrong\u003eThe kit includes:\u003c\/strong\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e- TITAN module with BASIC software\u003c\/span\u003e\u003c\/p\u003e \u003cp style=\"text-align: justify;\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"colour: #ff0000;\"\u003eNOTE! \u003cspan style=\"colour: #000000;\"\u003eIn order to configure the TITAN chip, it is necessary to use\u003c\/span\u003e\u003c\/span\u003e a USB-Link or Tactical Programming Card, which are not included in the kit and must be purchased separately.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GAT","offers":[{"title":"Default Title","offer_id":58630170771840,"sku":"GAT-08-028542-00","price":112.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1006\/3596\/7872\/files\/0c1a8510c5d1c5d26df918e0d338a54cdf175fed_1152225943_1_41058f12-c257-4de6-b7ed-cca26126e56d.webp?v=1787077873","url":"https:\/\/sectordefence.com\/products\/gunfire-1152225943-titan-v2-basic-controller-set-front-wired","provider":"sector defence","version":"1.0","type":"link"}